ADAM Audio Sub10 mk2 Active Studio Subwoofer
The active Sub10 mk2 subwoofer from Adam features a 10′ woofer with plenty of power. Extremely balanced and true low-frequency reproduction. The Sub10 is characterised by its definitive accuracy and true low-frequency sound reproduction. This sub pairs perfectly with the Adam A7X, F7, and S2X for a massive, full-frequency, big studio sound.
Features
-
The Sub10 Mk2 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 25Hz.
-
A sturdy special woofer with extended cone travel and a heavy-duty coil has been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed.
-
The Sub10 Mk2 subwoofer provides a precise combination of low cutoff frequency (-3 dB at 25Hz) and an undistorted high sound pressure level (113dB at 1m).
Panel / Controls
-
All subwoofers feature a level control (-60dB to +6dB), phase switch (180°) and variable upper-frequency control (50-150Hz). For the satellite outputs, an 85Hz high pass filter can be switched in to block frequencies below 85Hz so satellite speakers can meet the Dolby® recommendations for theater sound and also relieve the satellites from the lower frequencies. In addition, you can either switch on/off the subwoofer manually or use the option of automatically powering up the subwoofer whenever it receives a signal (‚signal-on/ continuous).
-
All subwoofers feature both balanced (XLR) and unbalanced (RCA) input/output connectors and comprehensive control options that allow for adapting to different room acoustics and requirements.
Specifications
Subwoofer
-
Number 1
-
Basket Ø 10″ (260 mm)
-
Voice coil Ø 2″ (50 mm)
-
Cone material Paper
-
Built-in Amplifiers
-
Subwoofer 1
-
Amp. power RMS / music 200 W / 300 W
Input connectors
-
Analog XLR / RCA
General data
-
Panel Rear
-
Frequency response 25 Hz – 150 Hz
-
THD > 60 Hz ≤1 %
-
Peak SPL max at 1m ≥113 dB
-
Crossover frequencies 50 – 150 Hz
-
Input impedance 10 KOhm
-
Weight 46.3 lb (21 kg)
-
Height x Width x Depth 22″ (560 mm) x 12″ (300 mm) x 15.5″ (400 mm)
-
Warranty 5 Years
Need more info on the Sub10? Click HERE for the official Adam Audio product listing >>>
